| Customization: | Available |
|---|---|
| Application Area: | Metallurgy |
| Feature: | High-Thermal Conductivity, Thermal Shock Resistance |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is Graphite Continuous Casting Die?
Continuous casting is used in high volume production of metals with a constant cross-section. Graphite is a widely used material in continuous casting die.
A wide variety of alloys are fabricated using Graphite continuous casting dies. Gray cast irons, copper-nickel alloys, nickel silvers, aluminum bronzes or gold and silver alloys, are some of the alloys that are produced with graphite dies.
The advantages of graphite crucible are as follows:
High-purity graphite crucible has excellent thermal stability, corrosion resistance, impact resistance, acid corrosion resistance, high thermal conductivity and quality stability, it has a certain resistance to rapid heat and cold. It is a kind of very excellent performance in molten gold crucibles, and is currently widely used in alloy tools The smelting of steel and the smelting of non-ferrous metals and their alloys. However, improper use of high-purity graphite crucibles will greatly affect its performance and service life.
Attentions of graphite crucible when using:
1: The high-purity graphite crucible must be slowly baked to 500 degrees Celsius before use. After use, it must be placed in a dry place to avoid water intrusion.
2: When using, it must be added according to the capacity of the high-purity graphite crucible, and the metals placed should not be squeezed too tightly to prevent the metal from thermally expanding and cracking the crucible.
3: When taking out the molten metal after melting, it is best to scoop it out with a spoon, use calipers as little as possible, and pay attention to the action to be light, to avoid impacting the crucible to excessive force and damage.
4: When using high-purity graphite crucible, avoid strong oxidizing flame directly spraying on the crucible wall, which will damage the crucible and shorten the service life.
The high-purity graphite crucible has excellent performance, but in order to better use and prolong the service life of the high-purity graphite crucible, we must know the above instructions to avoid damaging it.
Company Profile
Established in 2017, located in Fengxin Industrial Area, Yichun City, Jiangxi Province, China, Jiangxi Ningheda New Material Co., Ltd. is the subsidiary company of Jiangxi Ningxin New Material Co., Ltd.
Jiangxi Ningxin New Material Co., Ltd. is an enterprise which specializes in R&D, production and sale of special graphite. The total investment is RMB 180 million. It covers an area of more than 70000 square meters and produces 10000 tons of special graphite annually, which makes Ningxin to be the leading enterprise in the domestic industry.
On November 8th, 2016, Ningxin was listed of Chinese new third board. The stock abbreviation is Ningxin New Material, and stock code is 839719.
Jiangxi Ningheda New Material Co., Ltd. is mainly engaged in graphite product processing, graphite product matching service, providing graphite materials, graphite electrode and graphite products for the lithium industry, rare earth industry, machinery industry, aerospace, semiconductor and solar photovoltaic industry, together with the corresponding products technical service and technical application of update program.
With excellent production technology, good customer service, high market share, and relying on the advantage of new material, capital and management of parent company (Jiangxi Ningxin New Material Co., Ltd.), Jiangxi Ningheda New Material Co., Ltd. develops quickly. We devote to the extension of the special graphite industry chain, and make contributions for building the future whole graphite industry strategy.
Ningheda Graphite Technical Characteristic:
| Grade | NX601 | NX602 | NX603 | NX604 | NX605 |
| Grain Size (≤μm) | 25 | 25 | 25 | 25 | 25 |
| Bulk Density (≥g/cm3) | 1.55 | 1.72 | 1.80 | 1.85 | 1.90 |
| Compressive Strength (≥MPa) |
35 | 45 | 60 | 65 | 70 |
| Flexural Strength (≥MPa) |
15 | 20 | 30 | 33 | 35 |
| Porosity (≤%) | 23 | 20 | 17 | 14 | 11 |
| Specific Resistance (≤μΩm) |
12 | 12 | 12 | 12 | 12 |
| Ash Content (≤%) | 0.08 | 0.07 | 0.06 | 0.05 | 0.03 |
| Shore Hardness | 35 | 45 | 50 | 55 | 60 |
Advantages of Ningheda graphite raw material
1. The processing materials are ultrafine granule structure, high purity and graphite with high graphitization degree.
2. High hardness, good anti-oxidation performance and high machining accuracy
3. Good conductivity, high resistivity, sufficient mechanical strength
4. Small porosity and dense structure.
5. Excellent thermal shock resistance, conductive and thermal conductivity.
6. High temperature resistance, corrosion resistance, acid and alkali resistance, good wear resistance.
7. Surface can be treated with anti-oxidation.
FAQ:
Q1. Are you a factory or trading company?
A: We are an ISO9001-Qualified processing manufacturer with 70000 square meter factory area.
Q2. Can you introduce your main products?
A: Sure.
Jiangxi Ningheda New Material Co., Ltd. mainly produces graphite products, we can offer customized shape according to customers' specific demand. Our Graphite Products, including molded graphite products, isostatic graphite products, extruded graphite products, vibration moulding graphite products. We can produce a lot of graphite products, like graphite mold, graphite casting die, graphite heating element, graphite crucible, graphite sealing ring, graphite tube, graphite rod, graphite edm, graphite block etc.
Q3.What is your MOQ?
A: 1 piece (graphite block, graphite rod, graphite box, graphite mold, graphite material, graphite seal ring, graphite crucible, graphite products, graphite sintering mold, graphite heater etc.).
Q4. Can you offer free samples?
A: Yes, usually we can offer free sample for you to check the quality, but do not afford express charge.
However, if the sample is expensive, like large size, we has to charge basic cost of the sample. And Samples delivery time will be about 3-10 days.
Q5. When can I get the price?
A: We will reply you within 24 hours after getting your detailed requirements, like size, quantity etc. If it is an urgent order, you can call us directly.
Q6. Do you accept OEM or ODM orders?
A: Yes, of course, most of our products are customized.
Q7. How about your delivery time?
A: Usually 7 to 25 days after payment.
Q8. Do you test your goods before delivery?
A: Yes, we have strict inspection system.
Q9. How do you keep long-term business relationship?
A: 1. Good quality and competitive price to ensure mutual benefit;
2. Quick reply and sincere service.
Notice: When you contact us, please show us the accurate drawing and your selected graphite material information, then we can offer you accurate price.
Packing & Delivery
Packaging: export standard wooden case.
Delivery Detail: 15~30 working days after confirming order.
Sea Port: Shanghai or other port of China Mainland.
High Density Graphite Mold for Continuous Casting
For more details, pls contact Alisa!
){kind=link}