graphite carbon rod graphite products for high temperature furnce treatment
Graphite rod is used in the fields of national defense, machinery, metallurgy, chemical industry, casting, non-ferrous alloys, and lightening, especially black carbon rods. It is also used in the fields of ceramics, semiconductors, medicine, environmental protection, laboratory analysis, etc. metallic material. When cutting steel, it is not necessary to use flammable and explosive gases like oxygen-acetylene flame cutting, which has low cost and safe operation. You can use arc cutting to process a variety of metals that cannot be processed by gas cutting, such as cast iron, stainless steel, copper, aluminum, etc., with high efficiency, and all can get more ideal results. Performance: The component is hard and brittle, has a small expansion coefficient, can withstand rapid cooling and heat, is not easy to deform, has good chemical stability, has strong acid resistance, does not react with strong acids, has poor alkali resistance, and can corrode at high temperatures. Disassemble rod
- Technical Index
| Type |
MSS80 |
MSS85 |
MSS90 |
| Grain Size (μm) |
25 |
25 |
25 |
| Bulk Density (≥g/cm3) |
1.80 |
1.5 |
1.90 |
| Compressive Strength (≥MPa) |
60 |
70 |
80 |
| Flexural Strength(≥MPa) |
30 |
35 |
40 |
| Porosity(≤%) |
17 |
14 |
10 |
| Specific Resistance(≤μΩm) |
12 |
12 |
12 |
| Ash Content(≤%) |
0.06 |
0.05 |
0.05 |
| Shore Hardness |
50 |
55 |
60 |
The ash content can be purified to 30ppm according to the requirement.
The above index data is the standard value, not the guaranteed value
graphite carbon rod graphite products for high temperature furnce treatment
Audited Supplier 
){kind=link}
){kind=link}